This guide covers only fertilizer-grade calcium thiosulfate, not shower-filter dechlorination, water-treatment, retail or garden uses. The formula is CaS2O3. It is often sold under the CaTs® brand, a Tessenderlo Kerley trademark.

What bulk calcium thiosulfate is

Tessenderlo Kerley's international specification describes a clear liquid calcium and sulfur fertilizer with no nitrogen or chloride: 6% Ca and 10% S weight/weight (w/w), and 7.5% Ca and 12.5% S weight/volume (w/v), at a typical density of 1.25 kg/L at 25°C, plus 8.4% CaO w/w. The 2025 sell sheet and product page print the grade as 0-0-0-10S-6Ca by weight and 0-0-0-12.5S-7.5Ca by volume. Those figures are comparable only when you know the Ca or CaO form and the w/w or w/v basis.

Grades and specifications

The typical grade is 0-0-0-10S-6Ca by weight, with calcium as elemental Ca, not CaO. Density is typically 1.25 kg/L at 25°C, range 1.22-1.26 (SDS 2908, 16 September 2024, Section 9). Salt-out is typically 0°C (32°F). pH is 6.5-8.0 typical on the sell sheet and SDS, and 6.5-8.8 on the international sheet. Put those figures in the contract, require a lot COA, sample at loading, and name the method.

ParameterWhy it mattersWhere to verify
Ca or CaO %, and the basisCa vs CaO, w/w vs w/vLot COA; 6% Ca / 8.4% CaO w/w, 7.5% Ca w/v
Thiosulfate-S %Sulfur paid for, same basisLot COA; 10% S w/w, 12.5% S w/v
Density at a stated temperatureConverts L to kgLot COA; 1.25 kg/L at 25°C
pHBlend riskLot result; 6.5-8.0 or 6.5-8.8
Crystallization (salt-out) temperatureCold-season floorLot COA and SDS; 0°C / 32°F
Heavy metals2019/1009 limitsLab report vs ceilings below
InsolublesFilter and nozzle riskLot result and agreed maximum

Packing and logistics

Trade packs are ISO tanks, flexitanks and 1,000 L IBCs. Ask for a previous-cargo and cleaning certificate, and check liner, tank and gasket materials against the cargo SDS. Section 10.5 of Tessenderlo's SDS says not to use carbon steel, copper, zinc or their alloys, including brass, bronze or galvanized materials, in handling systems. State the loaded quantity in kg and L, with the density used, and plan cold-season transit against the contracted salt-out temperature.

How prices are quoted

Sellers quote on a weight basis, in kg, or a volume basis, in L, under an Incoterm such as FOB, CFR or CIF, using Incoterms 2020. Convert mixed kg and L offers with the COA density (L times kg/L equals kg). Compare landed value per kg of Ca or CaO and per kg of thiosulfate-S, on the same Incoterm. The quote should state the grade, Ca or CaO, w/w or w/v, density and temperature, packing, tank rental, cleaning and inspection.

Calcium thiosulfate vs ATS, potassium thiosulfate and calcium nitrate

Compared with ATS, potassium thiosulfate and calcium nitrate, this liquid supplies calcium and sulfur and no nitrogen.

ProductNutrient pairFormNitrogenStorage
Calcium thiosulfateCa and SLiquidNoneSDS 7.2
Ammonium thiosulfateN and SLiquidAmmoniacalATS guide
Potassium thiosulfateK and SLiquidNonePotassium thiosulfate guide
Calcium nitrateCa and NUsually solidMostly nitrateOxidizer; calcium nitrate guide

Tessenderlo's application guide says the solution blends with liquid urea and UAN in any ratio, and is not compatible with any phosphate, sulfate or ammonium thiosulfate fertilizer. Do not mix it with acid or acidic fertilizers below pH 6.0, and run a jar test.

Storage, handling and compatibility

Tessenderlo's SDS, Section 7.2, requires well-ventilated storage, away from combustibles, heat and flame. Sections 10.3 and 10.5 warn that strong oxidizers (nitrates, nitrites or chlorates) can form explosive mixtures if heated to dryness, that acids release sulfur dioxide, and that carbon steel, copper, zinc and their alloys must not be used in handling systems.

Regulatory documents

A CE-marked calcium-and-sulfur-only product falls under Regulation (EU) 2019/1009, Annex I, Part II as PFC 1(C)(I)(b)(ii), a compound liquid inorganic macronutrient fertiliser: more than one secondary macronutrient and no primary macronutrient. The minima are 0.75% CaO and 0.75% SO3 by mass, a combined declared content of at least 7% by mass, and an eligible component material category under Annex II. Contaminant ceilings include Cd 3 mg/kg dry matter where P2O5 is below 5% by mass, Cr VI 2, Hg 1, Ni 100, Pb 120 and As 40 mg/kg dry matter. Article 6(2) requires the manufacturer to draw up an EU declaration of conformity, affix the CE marking and keep the documents for 5 years (Article 6(3)). Annex III requires the label to state solution or suspension, and allows nutrient content as % by mass or volume. Confirm REACH registration of calcium thiosulfate (EC 233-333-7, CAS 10124-41-1) for the destination; HSE sets out GB duties. Non-EU rules vary.

Supplier checks before the first order

Ask whether the supplier manufactures the solution or trades it, and whether the cargo is a branded or generic grade. Compare recent lot COAs with the offered Ca or CaO, sulfur, density, salt-out and basis. Take a pre-shipment sample, book inspection at loading by SGS, BV or Intertek, and tie payment to those papers and the SDS.

FAQ

What is calcium thiosulfate, and what is the typical grade?

Calcium thiosulfate is a clear liquid calcium and sulfur fertilizer, formula CaS2O3, with no nitrogen. The typical grade is 0-0-0-10S-6Ca by weight: 6% Ca and 10% S w/w, or 7.5% Ca and 12.5% S w/v at a typical density of 1.25 kg/L at 25°C.

How is calcium declared on the label?

Calcium may be declared as elemental Ca or as CaO, and on a weight/weight or a weight/volume basis. Tessenderlo's international sheet lists 6% Ca w/w, equal to 8.4% CaO w/w, and 7.5% Ca w/v. Contract the form and the basis.

How is bulk calcium thiosulfate quoted?

Offers are quoted on a weight or volume basis, in kg or L, under an Incoterm such as FOB, CFR or CIF. Convert mixed kg and L offers with the lot density on the COA. Compare landed value per kg of Ca or CaO and of thiosulfate-S on the same Incoterm.

What should a COA include?

A lot COA should report Ca or CaO % and the basis, thiosulfate-S %, density at a stated temperature, pH, crystallization or salt-out temperature, insolubles and heavy metals against the destination limits, with the method named. Compare those results with the contract.

How is it shipped in ISO tanks, flexitanks or IBCs?

It usually ships in ISO tanks, flexitanks or 1,000 L IBCs. Require a previous-cargo and cleaning certificate, and check liner, tank and gasket materials against the cargo SDS, which in Section 10.5 rules out carbon steel, copper, zinc and their alloys. State the loaded quantity in kg and L.

How should it be stored, and what is it incompatible with?

Tessenderlo's SDS, Section 7.2, requires well-ventilated storage, away from combustibles, heat and flame. Section 10.5 warns that acids release sulfur dioxide and that strong oxidizers (nitrates, nitrites or chlorates) can form explosive mixtures if heated to dryness. Do not use carbon steel, copper or zinc alloys in equipment.

How does it compare with ATS, potassium thiosulfate and calcium nitrate?

Ammonium thiosulfate (ATS) is a liquid nitrogen-and-sulfur thiosulfate. Potassium thiosulfate is a liquid potassium-and-sulfur thiosulfate with no nitrogen. Calcium nitrate supplies calcium and nitrate nitrogen, and is usually a solid. Calcium thiosulfate supplies calcium and sulfur and contains no nitrogen.

What EU documents are needed under 2019/1009, REACH and CLP?

A CE-marked calcium-and-sulfur-only product is typically PFC 1(C)(I)(b)(ii), a compound liquid inorganic macronutrient fertiliser. Article 6(2) requires the manufacturer to draw up an EU declaration of conformity and affix the CE marking. Confirm REACH registration for the destination and read the CLP classification on the cargo SDS.

Source calcium thiosulfate on GetFertilizer

Post a request on GetFertilizer quote listings with grade, Ca or CaO basis, w/w or w/v, quantity in kg or L, packing and Incoterm. Browse inorganic fertilizer listings.

Sources