This guide covers only fertilizer-grade potassium thiosulfate (0-0-25-17S). It does not cover laboratory, photographic or dechlorination grades. The formula is K2S2O3. It is often sold under the KTS® brand, a Tessenderlo Kerley trademark.
What bulk potassium thiosulfate is
Tessenderlo Kerley's international specification describes a clear, chloride-free liquid potassium and sulfur fertilizer with no nitrogen: 25% K2O and 17% S weight/weight (w/w), and 36.8% K2O and 25% S weight/volume (w/v), at a typical density of 1.47 kg/L at 25°C. A 0-0-25-17S grade is only comparable once you know whether those percentages are w/w or w/v. Buyers compare it with ammonium thiosulfate (ATS), solid MOP or SOP and polyhalite.
Grades and specifications
The standard grade is 0-0-25-17S by weight on Tessenderlo's July 2025 sell sheet, which lists a specific gravity of 1.46, a pH of 7-8.2 and a salt-out below 15°F. The international sheet gives a density range of 1.45-1.49 at 25°C and a typical salt-out of -10°C. The SDS, revision 16 September 2024, Section 9, gives a typical relative density of 1.46, pH 7-9 and a typical salt-out below 5°F (below -15°C). Put those figures in the contract and require a lot COA with methods and results.
| Parameter | Why it matters | Where to verify |
|---|---|---|
| K2O % | Potash paid for (w/w vs w/v) | Lot COA; 25% w/w, 36.8% w/v |
| Thiosulfate-S % | Sulfur paid for, same basis | Lot COA; 17% w/w, 25% w/v |
| Density at a stated temperature | Converts L to kg | Lot COA; 1.47 kg/L at 25°C (1.45-1.49) |
| pH | Blend risk | Lot result; sell sheet 7-8.2, SDS 7-9 |
| Crystallization (salt-out) temperature | Cold-season floor | Lot COA and SDS; contract the value |
| Chloride | Chloride-free claim | Lot result vs contract |
| Heavy metals | 2019/1009 and other limits | Lab report vs the ceilings below |
| Insolubles | Filter and nozzle risk | Lot result and an agreed maximum |
Packing and logistics
Importers usually ship in ISO tanks, flexitanks or 1,000 L IBCs. Ask for a previous-cargo and cleaning certificate, and check liner and tank materials against the cargo SDS. Section 10.5 of Tessenderlo's SDS says the solution is not compatible with lead or mercury or their alloys. State the loaded quantity in both kg and L, with the density used. Plan cold-season transit against the contracted crystallization temperature.
How prices are quoted
Sellers quote on a weight basis, in kg, or a volume basis, in L, under a named Incoterm such as FOB, CFR or CIF, using Incoterms 2020. If offers mix kg and L, convert with the cargo density on the COA (L multiplied by the lot density in kg/L gives kg). Compare landed value per kg of K2O and per kg of thiosulfate-S, on the same basis and Incoterm. The quote should state the grade, w/w or w/v basis, density and temperature, packing, and tank rental, cleaning and inspection.
Potassium thiosulfate vs ATS and other K and S sources
ATS is a liquid nitrogen-and-sulfur thiosulfate; this grade is a liquid potassium-and-sulfur thiosulfate with no nitrogen. Tessenderlo's application guide says the solution is compatible with liquid urea and APP in any ratio, and says not to mix it with acid or acidic fertilizers below pH 6.0. Blends with UAN need water added on a weight basis equal to the weight of potassium thiosulfate or UAN, in the order potassium thiosulfate, then water, then UAN. In cold weather, potassium can react with nitrate to form potassium nitrate crystals. Run a jar test.
Storage, handling and compatibility
Tessenderlo's SDS, Section 7.2, requires well-ventilated storage, away from combustibles, heat and flame, with totes and smaller containers kept out of direct sunlight at moderate temperatures. Section 10.5 warns that strong oxidizers such as nitrates, nitrites or chlorates can form explosive mixtures if heated to dryness, and that acids release sulfur dioxide, a severe respiratory hazard.
Regulatory documents
For a CE-marked, potassium-and-sulfur-only product, Regulation (EU) 2019/1009, Annex I, Part II places the liquid in PFC 1(C)(I)(b)(i), a straight liquid inorganic macronutrient fertiliser, with minima of 1.5% K2O and 0.75% SO3 by mass, a combined declared content of at least 7% by mass, and an eligible component material category under Annex II. Contaminant ceilings include cadmium at 3 mg/kg dry matter where P2O5 is below 5% by mass, hexavalent chromium 2, mercury 1, nickel 100, lead 120 and arsenic 40 mg/kg dry matter. Article 6(2) requires the manufacturer to draw up an EU declaration of conformity, affix the CE marking and keep those documents for 5 years (Article 6(3)). Annex III requires the label to say whether the product is a solution or a suspension, and allows nutrient content as % by mass or volume. Tessenderlo's SDS, Section 2, has no health or physical hazard classification. Confirm REACH registration of potassium thiosulfate (EC 233-666-8, CAS 10294-66-3) for the destination. HSE sets out the general GB duties.
Supplier checks before the first order
Ask whether the supplier manufactures the solution or trades it, and whether the cargo is a branded or generic grade. Compare recent lot COAs with the offered K2O, sulfur, density and salt-out guarantees. Take a pre-shipment sample, book inspection at loading by SGS, BV or Intertek, and tie payment to those papers, the SDS and off-spec remedies.
FAQ
What is potassium thiosulfate, and what is the standard grade?
Potassium thiosulfate is a clear liquid potassium and sulfur fertilizer, formula K2S2O3. The standard grade is 0-0-25-17S. Tessenderlo's international sheet states 25% K2O and 17% S weight/weight, equal to 36.8% K2O and 25% S weight/volume at a typical density of 1.47 kg/L at 25°C. Confirm the w/w or w/v basis.
How is bulk potassium thiosulfate quoted?
Offers are quoted on a weight basis, in kg, or a volume basis, in L, under a named Incoterm such as FOB, CFR or CIF. If offers mix kg and L, convert with the lot density on the COA. Compare landed value per kg of K2O and of thiosulfate-S on the same Incoterm.
What should a COA include?
A lot COA should report K2O %, thiosulfate-S %, density at a stated temperature, pH, crystallization or salt-out temperature, chloride, insolubles and heavy metals against the destination limits, with the method named. Compare those results with the contract, not a brochure typical.
How is it shipped in ISO tanks, flexitanks or IBCs?
Importers usually ship in ISO tanks, flexitanks or 1,000 L IBCs. Ask for a previous-cargo and cleaning certificate, and check liner and tank materials against the cargo SDS, which in Section 10.5 rules out lead and mercury and their alloys. State the loaded quantity in both kg and L, with the density used.
How should it be stored, and what is it incompatible with?
Tessenderlo's SDS, Section 7.2, requires well-ventilated storage, away from combustibles, heat and flame, with totes and smaller containers kept out of direct sunlight at moderate temperatures. Section 10.5 warns that acids release sulfur dioxide and that strong oxidizers such as nitrates, nitrites or chlorates can form explosive mixtures if heated to dryness.
How does it differ from ATS for a buyer?
Ammonium thiosulfate (ATS) is a liquid nitrogen-and-sulfur thiosulfate. Potassium thiosulfate supplies potassium and sulfur and contains no nitrogen. Tessenderlo describes the grade as chloride-free. The two solutions are not interchangeable, so a buyer has to match the nutrient need and the packing.
What EU 2019/1009 documents are needed?
A CE-marked, potassium-and-sulfur-only product is typically PFC 1(C)(I)(b)(i), a straight liquid inorganic macronutrient fertiliser. Article 6(2) requires the manufacturer to draw up an EU declaration of conformity and affix the CE marking. Annex III requires the label to state solution or suspension.
How should a first-time buyer check a supplier?
Ask whether the supplier manufactures the solution or trades it, and whether the cargo is a branded or generic grade. Compare recent lot COAs with the offered guarantees. Take a pre-shipment sample and book inspection by SGS, BV or Intertek at loading. Tie payment to those papers, the SDS and off-spec remedies.
Source potassium thiosulfate on GetFertilizer
Post a request on GetFertilizer quote listings with grade, w/w or w/v basis, quantity in kg or L, packing and Incoterm. Browse inorganic fertilizer listings to compare offers.
Sources
- Tessenderlo Kerley KTS international specification (w/w and w/v contents, density 1.47 kg/L at 25°C, density range, salt-out -10°C, chloride-free, formula K2S2O3)
- Tessenderlo Kerley KTS sell sheet, July 2025 (0-0-25-17S by weight, specific gravity 1.46, pH 7-8.2, salt-out below 15°F, KTS® trademark)
- Tessenderlo Kerley KTS application guide (compatibility with urea and APP, pH 6.0 acid limit, UAN water addition and blend order, jar test)
- Tessenderlo Kerley KTS SDS, number 155, revision 16 September 2024 (Sections 2, 7, 9 and 10: pH, density, salt-out, storage, incompatibilities, CLP classification, EC 233-666-8, CAS 10294-66-3)
- Regulation (EU) 2019/1009, Annex I, Part II, Article 6 and Annex III, via legislation.gov.uk
- HSE, UK REACH registration
- ICC Incoterms 2020
