Before contracting for ammonium polyphosphate (APP) liquid fertilizer, fix the N-P2O5 grade, polyphosphate share of total P2O5, density and packing. This ammonium polyphosphate fertilizer guide covers fertilizer-grade APP only. Flame-retardant APP is a different product and is outside this article.

What APP is and who buys it

Fertilizer APP is an aqueous ammonium phosphate solution that supplies nitrogen and water-soluble phosphate. Distributors and liquid-blend plants use it for starter programs, fertigation and NPK liquid mixes where polyphosphate helps keep micronutrients in solution (Simplot 10-34-0; Simplot 11-37-0).

Liquid fertilizer grades and what the numbers mean

The main traded liquids are 10-34-0 and 11-37-0 in N-P2O5-K2O order. Nutrien's POLY10 sheet guarantees minimum 10.0% N and 34.0% P2O5. Nutrien's POLY11 sheet guarantees minimum 11.0% N and 37.0% P2O5. Simplot publishes the same guaranteed N and P2O5 for its matching grades. Ask for the producer's current sheet for that plant.

Fertilizer APP vs flame-retardant APP

Fertilizer APP is a water-soluble nutrient solution. Flame-retardant APP is a low-solubility solid used in polymers and coatings. Keep them on separate purchase orders.

Polyphosphate content

Total P2O5 on a liquid APP label is a mix of polyphosphate and orthophosphate. Nutrien lists a typical polyphosphate share of 72.0% of total P2O5 for POLY10 and 70.2% for POLY11. Simplot describes about 70% polyphosphate and 30% orthophosphate for both liquid grades. Mears' 10-34-0 data sheet states 65% of total P2O5 as polyphosphate and 35% as orthophosphate. Contract a minimum poly share if your blends need it.

Simplot says the polyphosphate content helps hold micronutrients in solution. Polyphosphate also hydrolyses toward orthophosphate in storage. Nutrien expects at least nine months of shelf life below 21 °C in suitable containers, and notes shelf life falls quickly above 32 °C. No formal expiry date is assigned, so agree storage temperature and a retest window.

How bulk APP is priced

Weight vs volume

Ammonium polyphosphate is quoted on a weight basis or a volume basis under a named Incoterm. If offers mix kg and L, convert with the cargo density on the COA. Nutrien reports specific gravity of 1.393 for its 10-34-0 and 1.440 for its 11-37-0 at 24 °C. Use the lot figure, not a brochure average from another plant or grade.

Incoterm and packing format

Compare FOB, CFR or CIF offers on the same port and packing. Confirm ISO tanks, flexitanks, tanker parcels or IBCs such as 1,000 L units. Check net fill, tare and whether tank rental, cleaning and inspection sit inside the quote.

What moves the offer

Ask how phosphoric acid, ammonia, freight and season affect availability. Match grade, poly share, density and packing before ranking offers. Lower density or a lower poly share can erase a cheaper invoice once nutrient delivery and blend performance are counted.

COA and specification checks

Require a lot COA with methods and results. Keep total N, total P2O5 and poly share on separate lines.

ParameterWhy it mattersWhere to verify
Total NSets the grade and the nitrogen paid forLot COA against the grade guarantee (Nutrien/Simplot minima above)
Total P2O5Sets the phosphate guaranteeLot COA; water-soluble phosphate if the market requires it
Poly share of total P2O5Affects micronutrient holding and storage behaviourLot result vs the contracted minimum
Density (kg/L) or specific gravityConverts weight and volume quotesCOA temperature and method; Nutrien quotes specific gravity at 24 °C
pHAffects corrosion and blend compatibilityLot result; Nutrien typical 6.1; Mears range 5.8 to 6.2
Salting-out temperatureWarns of cold-weather crystallisationProducer sheet: Nutrien lists about -17.7 °C for POLY10 and 0 °C for POLY11
Insolubles / solidsProtects filters and nozzlesLot result; Nutrien typical solids 0 wt %
Heavy metals including cadmiumDestination complianceAccredited lab report against the market's limits

Agree whose analysis is final, how retained samples are held and how density is measured for invoice conversion.

Packing, shipping and storage

Agree clean tanks and a previous-cargo certificate before loading. Nutrien's SDS warns that the solution may be corrosive to metals and lists aluminium, copper, zinc and their alloys, including brass, bronze and galvanized materials, as incompatible. Mears recommends mild steel or suitable fiberglass for storage, advises against aluminium for long-term storage, and says pumps should avoid brass or copper alloys.

Watch salting-out in cold weather. Keep storage in the producer's recommended temperature range if you need to hold the poly share. Keep containers closed, protect them from contamination and rotate older lots first. Define rejection rules for crystallisation, tank residues and warm-storage hydrolysis before shipment.

Blending with UAN and micronutrients

Simplot states that its liquid 11-37-0 is compatible with most other liquid fertilizers and is not compatible with aqua or anhydrous ammonia. Mears gives the same ammonia warning for 10-34-0 and recommends a small pretest before full production. Run a jar test for every new recipe, including mixes with UAN or micronutrient solutions, and get the APP supplier's written confirmation before commercial blending.

APP vs MAP and DAP

Liquid APP and granular MAP or DAP both supply ammonium nitrogen and phosphate, but the logistics differ. APP is pumped into tanks; MAP and DAP need dry storage. Liquid blenders choose APP when they need polyphosphate to hold micronutrients in solution. Granular MAP and DAP suit dry bulk programs and buyers without liquid tanks.

Compare landed nutrient cost, storage assets and application method before substituting one for the other. Specs for the solids are in our DAP/MAP guide. For other water-soluble phosphates, see the MKP guide and the urea phosphate guide.

Compliance and import documents

For CE-marked EU fertilising products, Regulation (EU) 2019/1009, Annex I, PFC 1(C)(I) sets contaminant limits. For phosphate fertilizers with at least 5% P2O5-equivalent by mass, the cadmium ceiling is 0.000060 kg cadmium/kg P2O5. The same section sets lead at 0.000120 kg/kg dry matter and mercury at 0.000001 kg/kg dry matter. These figures are converted to kg from the regulation's published units and apply only inside that legal category.

Ask your broker for the document set: COA, certificate of origin, commercial invoice, packing list, transport document and SDS, plus registration or import permits where required. Nutrien's SDS lists the solution as not regulated for transport under DOT, TDG, IMDG and IATA; Simplot's SDS likewise states it is not regulated for transport. Follow the SDS that travels with the cargo; classification can differ by producer and destination.

Supplier checks before signing

Ask whether the ammonium polyphosphate supplier manufactures the solution or trades another plant's output. Verify the producing plant and compare recent lot COAs with the offered N, P2O5, poly share, density and pH guarantees.

Book independent sampling and inspection at loading, including tank cleanliness and previous-cargo documents. Tie payment to inspection papers and remedies for off-spec density, poly share or contamination. A sales sample does not replace inspection of the loaded cargo.

FAQ

What do 10-34-0 and 11-37-0 mean on liquid APP?

They are N-P2O5-K2O labels. Nutrien and Simplot guarantee 10% N and 34% P2O5 for 10-34-0, and 11% N and 37% P2O5 for 11-37-0, with no potash. Confirm the minima on the producer's current sheet.

Why does polyphosphate content matter?

The poly fraction helps hold micronutrients in solution and changes as the product hydrolyses in storage. Contract a minimum poly share if your blends depend on it, and control storage temperature.

How should importers compare APP quotes?

Match grade, poly share, density and packing, then convert every offer to the same weight or volume basis with the COA density under the same Incoterm.

Can APP be blended with UAN?

Only after a jar test and supplier confirmation. Simplot and Mears both warn against aqua or anhydrous ammonia; other liquid mixes still need a pretest.

What packing is used for bulk APP?

Producers supply bulk liquid. Confirm whether your shipment moves in ISO tanks, flexitanks, IBCs or other agreed containers, and require a cleanliness certificate before loading.

Source APP on GetFertilizer

Post an APP request on GetFertilizer quote listings with grade, poly share, quantity in kg or L, density basis, packing and Incoterm. Browse inorganic fertilizer listings to compare offers.